3Com MSR 30 Translate, Undo translate x25 x.121-address, Parameter x.121-address X.121 address

440CHAPTER 26: LAPB AND X.25 CONFIGURATION COMMANDS

Description Use the translate ip command to configure an X2T forwarding route from IP network to X.25 network.

Use the undo translate ip command to remove the route.

When a host in the IP network sends packets to the specified IP address and port number of the device, the device will translate these IP packets to X.25 ones and then forward them to the specified X.121 address or PVC in the X.25 network.

c CAUTION:

■The maximum number of IP-to-X.25 mappings varies by device.

■For the translate ip command, if an IP address uses only one port number, port number 102 is preferred whenever possible. If an IP address uses multiple port numbers, port numbers between 1024 and 5000 are recommended and the well-known port numbers (such as 21, 23) are not used to avoid network failure.

Example # Configure an X2T forwarding route to forward the packets that the local device receives at 10.1.1.1:102 to the X.121 address 111.

<Sysname> system-view

[Sysname] translate ip 10.1.1.1 port 102 x25 111

#Configure an X2T forwarding route to forward the packets that the local device receives at 10.1.1.1:102 to PVC 1 on the interface Serial2/0.

<Sysname> system-view

[Sysname] translate ip 10.1.1.1 port 102 pvc serial 2/0 1

translate x25

Syntax translate x25 x.121-address ip ip-address port port-number

undo translate x25 x.121-address

View System view

Parameter x.121-address: X.121 address.

ip ip-address:IP address of the remote host.

port port-number: Port number of the remote host.

Description Use the translate x25 command to configure an X2T forwarding route from X.25 network to IP network.

Use the undo translate x25 command to cancel this configuration.

You can implement the packet forwarding from an X.25 network to an IP network using this command. The device compares the destination address in the X.25 call request packet to the x.121-address, if they match, then initiates a TCP connection