3Com MSR 50, MSR 30 manual Filter-policy exportOSPFv3 view, 1295

1295

Hello due in 00:00:02

Adjacency state :Full

Table 315 Description on the fields of the display ospfv3 vlink command

Field Description

Virtual Link VLINK1 to router 1.1.1.1 is up

Transit area 0.0.0.1 via interface Serial2/0 instance ID

Local address

Remote address

Transmit Delay

State

Timer intervals configured, Hello: 10, Dead: 40,

Wait: 40, Retransmit: 5 Hello due in 00:00:02 Adjacency state

The virtual link VLINK1 to router 1.1.1.1 is up

Interface Serial 2/0 in transit area 0.0.0.1. Instance ID

Local IPv6 address

Remote IPv6 address

Transmit delay of sending LSAs

Interface state

Timer intervals in seconds, Hello: 10, Dead:

40, Wait: 40, Retransmit: 5 Send hello packets in 2 seconds. Adjacency state

filter-policy export(OSPFv3 view)

Syntax filter-policy { acl-numberipv6-prefix ipv6-prefix-name} export [ isisv6 process-idospfv3 process-idripng process-idbgp4+ direct static]

undo filter-policy export [ isisv6 process-idospfv3 process-idripng process-idbgp4+ direct static ]

View OSPFv3 view

Parameters acl-number: Specifies the ACL number, ranging from 2000 to 3999.

ipv6-prefixipv6-prefix-name: Specifies the name of an IPv6 prefix list, a string of up to 19 characters.

isisv6 process-id: Specifies to filter the routes of an IPv6 IS-IS process, which is in the range of 1 to 65535.

ospfv3 process-id: Specifies to filter the routes of an OSPFv3 process, which is in the range of 1 to 65535.

ripng process-id: Specifies to filter the routes of a RIPng process, which in the range of 1 to 65535.

bgp4+: Specifies to filter BGP4+ routes.

direct: Specifies to filter direct routes.

static: Specifies to filter static routes.

Description Use the filter-policy export command to filter redistributed routes.