3Com MSR 30, MSR 50 manual Display fr lmi-info, Range 0 to, Frame

374CHAPTER 22: FRAME RELAY CONFIGURATION COMMANDS

Parameter	interface-type { interface-number interface-number.subnumber }: Specifies an
	interface by its type and number. The interface-numberargument is a main
	interface number. The subnumber argument is a subinterface number, in the
	range 0 to 1023.
Description	Use the display fr interface command to display information about the
	specified or all frame relay interfaces.
	You can specify a main interface or a subinterface by providing the interface-type
	{ interface-number interface-number.subnumber } argument combination.
Example	# Display information about all frame relay interfaces.
	<Sysname> display fr interface
	Serial2/0, multi-point, protocol up
	Serial2/0.1, point-to-point, protocol down
	Table 42 Description on the fields of the display fr interface command
	Field	Description
	Serial2/0, multi-point, protocol up	Frame relay interface, its type and link layer state
	Serial2/0.1, point-to-point, protocol	Subinterface, its type and link layer state
	down

display fr lmi-info

Syntax	display fr lmi-info[ interface interface-type interface-number ]
View	Any view
Parameter	interface interface-typeinterface-number: Specifies an interface by its type and
	number.
Description	Use the display fr lmi-infocommand to display the statistics of LMI protocol
	frame.
	The LMI protocol maintains current frame relay link by sending status enquiry
	packets and status packets. The displayed information helps you diagnose faults.
Example	# Display the statistics about LMI protocol frames.
	<Sysname> display fr lmi-info
	Frame relay LMI statistics for interface Serial2/1 (DTE, Q933)
	T391DTE = 10 (hold timer 10)
	N391DTE = 6, N392DTE = 3, N393DTE = 4
	out status enquiry = 96, in status = 85
	status timeout = 3, discarded messages = 3
	Frame relay LMI statistics for interface Serial2/0 (DCE, Q933)
	T392DCE = 15, N392DCE = 3, N393DCE = 4
	in status enquiry = 0, out status = 0
	status enquiry timeout = 0, discarded messages = 0