3Com MSR 50, MSR 30 manual Peer route-update-interval BGP/BGP-VPN instance view, 1003

1003

Parameters group-name: Name of a peer group, a string of 1 to 47 characters. ip-address: IP address of a peer.

route-policy-name: Routing policy name, a string of 1 to 19 characters.

export: Applies the routing policy to routes outgoing to the peer (or peer group).

import: Applies the routing policy to routes incoming from the peer (or peer group).

Description Use the peer route-policycommand to apply a routing policy to routes incoming from or outgoing to a peer or peer group.

Use the undo peer route-policycommand to remove the configuration.

By default, no inbound/outbound routing policy is configured for the peer/peer group.

The peer route-policy command does not apply the if-match interface clause in the referenced routing policy. Refer to “route-policy” on page 1205 and “if-match interface” on page 1200

Examples # In BGP view, apply routing policy test-policyto routes outgoing to peer group test.

<Sysname> system-view [Sysname] bgp 100

[Sysname-bgp] peer test route-policy test-policy export

#In BGP-VPN instance view, apply routing policy test-policyto routes outgoing to the peer group test (the VPN has been created).

<Sysname> system-view [Sysname] bgp 100

[Sysname-bgp] ipv4-family vpn-instance vpn1 [Sysname-bgp-vpn1] peer test route-policy test-policy export

peer route-update-interval (BGP/BGP-VPN instance view)

Syntax peer { group-name ip-address } route-update-intervalseconds undo peer { group-name ip-address } route-update-interval

View BGP view/BGP-VPN instance view

Parameters group-name: Name of a peer group, a sting of 1 to 47 characters. ip-address: IP address of a peer.

seconds: Minimum interval for sending the same update message. The range is 5 to 600 seconds.