3Com MSR 50, MSR 30 manual Description of the fields of the display mfr command, 663

663

Line protocol current state: UP (spoofing)

Description: Virtual-Template1 Interface

The Maximum Transmit Unit is 1500, Hold timer is 10(sec)

Internet protocol processing : disabled

Link layer protocol is PPP

LCP initial

Physical is None

Output queue : (Urgent queue : Size/Length/Discards) 0/50/0

Output queue : (Protocol queue : Size/Length/Discards) 0/500/0

Output queue : (FIFO queuing : Size/Length/Discards) 0/75/0

Last 300 seconds input: 0 bytes/sec 0 packets/sec

Last 300 seconds output: 0 bytes/sec 0 packets/sec

0 packets input, 0 bytes, 0 drops

0 packets output, 0 bytes, 0 drops

The “LCP initial” field of the display interface virtual-templatecommand indicates that LCP is initialized. Refer to Table 117 for the description on the other fields.

display mfr

Syntax display mfr [ interface interface-type interface-number verbose ]

View Any view

Parameter interface-typeinterface-number: Interface type and interface number.

verbose: Displays the detailed statistics.

Description Use the display mfr command to display the configuration information and statistics information about the MFR bundle and bundled links.

Example # Display the configuration information and state information about all the MFR bundles and bundled links.

<Sysname> display mfr

Bundle interface:MFR0, Bundle State = up, Bundle Class = A

fragment disabled

Bundle name = MFR0

Bundle links:

Serial1/0, PHY state = up, link state = up, Link name = Serial1/0

Table 120 Description of the fields of the display mfr command

Field	Description
Bundle interface	Bundled interface
Bundle state	State of the bundled interface
Bundle class	If the bundle class is A, the state of the bundled interface is
	up only if one of the bundled links is up; when all the
	bundled links are down, the state of the bundled interface
	is shown as down.
fragment disabled	Whether fragmentation is enabled (in this example,
	fragmentation is disabled)