3Com MSR 50, MSR 30 manual Reset mpls fast-forwarding cache, Reset mpls ldp

1557

View MPLS LDP remote peer view

Parameter ip-address: IP address of the remote peer.

Description Use the remote-ipcommand to configure the LDP remote peer IP address.

Use the undo remote-ipcommand to remove the configuration.

Note that the LDP remote peer IP address must be the MPLS LSR ID of the remote peer. Two peers use their respective MPLS LSR ID as the transport addresses to establish the TCP connection.

Related command: mpls ldp remote-peer.

Example # Configure the LDP remote peer IP address.

<Sysname> system-view

[Sysname] mpls ldp remote-peer BJI

[Sysname-mpls-ldp-remote-bji] remote-ip 3.3.3.3

reset mpls fast-forwarding cache

Syntax	reset mpls fast-forwarding cache
View	User view
Parameter	None
Description	Use the reset mpls fast-forwarding cache command to clear information in
	the MPLS fast forwarding cache.
Example	# Clear information in the MPLS fast forwarding cache.
	<Sysname> reset mpls fast-forwarding cache

reset mpls ldp

Syntax	reset mpls ldp [ all [ vpn-instance vpn-instance-name] [ fec mask peer peer-id] ]
View	User view
Parameter	all: Specifies all LDP instances, including the public ones and private ones.
	vpn-instancevpn-instance-name: Specifies a VPN instance by its name, a
	case-sensitive string of 1 to 31 characters.
	fec mask: Specifies a FEC by the destination IP address and mask.
	peer peer-id: Specifies a peer by its LSR ID.