3Com MSR 30, MSR 50 manual Source ip, Source port, Syntax source ip ip-address Undo source ip

2284 CHAPTER 149: NQA CLIENT CONFIGURATION COMMANDS

<Sysname> system-view [Sysname] nqa entry admin test

[Sysname-nqa-admin-test] type icmp-echo [Sysname-nqa-admin-test-icmp-echo] source interface ethernet 1/0

source ip

Syntax source ip ip-address

undo source ip

View DLSw/FTP/HTTP/ICMP-echo/SNMP/TCP/UDP-echo/UDP-jitter test type view

Parameter ip-address: Source IP address of a test operation.

Description Use the source ip command to configure the source IP address of ICMP probe requests in a test operation.

Use the undo source ip command to remove the configured source address.

That is, the IP address of the interface sending a probe request serves as the source

IP address of the probe request.

By default, no source IP address is specified. For an ICMP-echo test, if no source IP address is specified, but the source interface is specified, the IP address of the source interface is taken as the source IP address of ICMP probe requests.

Related command: source interface.

Example # Configure the source IP address of an ICMP-echo probe request as 10.1.1.1.

<Sysname> system-view [Sysname] nqa entry admin test

[Sysname-nqa-admin-test] type icmp-echo [Sysname-nqa-admin-test-icmp-echo] source ip 10.1.1.1

source port

Syntax source port port-number

undo source port

View SNMP/UDP-echo/UDP-jitter test type view

Parameter port-number: Source port number for a test operation, in the range 1 to 50000.

Description Use the source port command to configure the source port of ICMP probe requests in a test operation.

Use the undo source port command to remove the configured port number.