3Com MSR 50 Debugging link-aggregation event, Syntax debugging link-aggregation event, 489, Error

489

Table 78 Description on the fields of debugging link-aggregation error command

Field	Description
File	The program file that incurs a running error
Line	The number of the line where the error occurs
ERROR	Error description

Examples # Enable debugging for link aggregation errors to view the error information prompted during the system running.

<Sysname> debugging link-aggregation error

*0.21953 Sysname LAGG/8/lacpErrorEvent:

File e:v500d05sp1softwarelacplacp_agm.c, Line: 1200

ERROR------ Portindex: 1 LACP_SendLACPPacket ,g_ucLacpSysMAC NULL !

//File e:v500d05sp1softwarelacplacp_agm.c has a running error, which occurs at line 1200. The ERROR field indicated that the system MAC address obtained is null.

debugging link-aggregation event

Syntax debugging link-aggregation event

undo debugging link-aggregation event

View User view

Default Level 1: Monitor level

Parameters None

Description Use the debugging link-aggregation event command to enable debugging for link aggregation events.

Use the undo debugging link-aggregation event command to disable debugging for link aggregation events.

By default, debugging for link aggregation events is disabled.

Table 79 Description on the fields of debugging link-aggregation event command

Field	Description
Agg Index	Aggregation group ID
Cfg MD5	MD5 digest
Restriction Value	Hardware restriction parameter
Admin Key	Administration key
Port Pri	Port LACP priority
Sys Mac	System MAC address
Sys Pri	System LACP priority
Oper Key	Port operation key