3Com MSR 30, MSR 50 Display vam server address-map, Vam server vpn , authentication-algorithm

1722 CHAPTER 99: VAM SERVER CONFIGURATION COMMANDS

View	VPN domain view
Parameter	none: Specifies not to authenticate clients.
	pap: Specifies to adopt PAP (password authentication protocol) authentication.
	chap: Specifies to adopt CHAP (challenge authentication protocol) authentication.
	domain name-string: Specifies the ISP domain for authentication by its name,
	which is a case-insensitive string of 1 to 24 characters.
Description	Use the authentication-methodcommand to configure the mode for the VAM
	server to authenticate clients.
	Use the undo authentication-methodcommand to restore the default.
	By default, CHAP authentication is adopted and the ISP domain is the default
	domain of the system that you configure.
Related command:	vam server vpn, authentication-algorithm.
Example	# Set the VAM server to authenticate clients using CHAP.
	<Sysname> system-view
	[Sysname] vam server vpn 1
	[Sysname-vam-server-vpn-1] authentication-method chap

display vam server address-map

Syntax	display vam server address-map { all vpn vpn-name[ private-ip private-ip] }
View	Any view
Parameter	all: Displays address mapping information about all registered VAM clients on the
	VAM server.
	vpn vpn-name: Displays address mapping information about all registered VAM
	clients in the VPN domain. The vpn-nameargument indicates the VPN domain
	name, a case-insensitive string of 1 to 15 characters.
	private-ipprivate-ip: Displays address mapping information about the VAM client
	with the specified private IP address. The private-ipargument indicates the private
	IP address of the VAM client.
Description	Use the display vam server address-mapcommand to display address
	mapping information about the registered clients on the server.
Example	# Display mapping information of the VAM clients in VPN domain 1.
	<Sysname> display vam server address-map vpn 1
	VPN name:	1