3Com MSR 50, MSR 30 Reset fr inarp, View Frame relay switching view, Syntax reset fr inarp, 407

407

Example # Set the size of the sliding window of the MFR bundle interface MFR4 to be 8.

<Sysname> system-view

[Sysname] interface mfr 4

[Sysname-MFR4] mfr window-size 8

shutdown

Syntax shutdown

undo shutdown

View Frame relay switching view

Parameter None

Description Use the shutdown command to disable the current switching PVC.

Use the undo shutdown command to enable the current switching PVC.

By default, the switching PVC is enabled.

Example # Create a PVC named pvc1 on the DCE serving as the switch, which is from the DLCI 100 of Serial 2/0 to the DLCI 200 of Serial 2/1 and disable the current switching PVC.

<Sysname> system-view [Sysname] fr switching

[Sysname] fr switch pvc1 interface serial 2/0 dlci 100 interface ser ial 2/1 dlci 200

[Sysname-fr-switching-pvc1] shutdown

reset fr inarp

Syntax reset fr inarp

View User view

Parameter None

Description Use the reset fr inarp command to clear the address mapping established by inverse ARP.

In some special cases, for example, when the network architecture changes, the dynamic address maps originally established will become invalid. Hence it is necessary to establish them again. Users can use this command to clear all the dynamic address maps.

Related command: fr inarp.