3Com MSR 50, MSR 30 manual Description on the fields of the display dsl status command, 135

135

TxPower(dBm):	9.50
Power Backoff: enable
Power Backoff Level:	5
Tip/Ring Reversal:	Reversed
FrmOH Stat:	0x00
Rmt Encoder A : 0x0000016e
Rmt Encoder B : 0x00000331
Rmt NSF Cusdata :	0x0000
Rmt NSF CusID : 0x0000
Rmt Country Code :	0x00b5
Rmt Provider Code:	GSPN
Rmt Vendor Data:	0x12 0x34 0x56 0x78
	0x12	0x34	0x56	0x78
Table 2 Description on the fields of the display dsl status command
Field		Description
Operating Mode		CPE or CO
DSL Mode		Annex standard used on the interface: Annex A or Annex
		B
Configured Wire Type		Configured wire mode of the interface: two-wire or
		four-wire
Line A Statistics since last		Statistics about wire-pair A from the time of initiating to
activation		present
CRC		Count of CRC errors
LOSW Defect		Count of loss of synchronization word defects
ES		Error second, count of errors per second
SES		Severely error second, count of severe errors per second
UAS		Unavailable second, count of one-second intervals for
		which the G.SHDSL line is unavailable
TX EOC		Count of transmitted EOC cells
RX EOC		Count of received EOC cells
Line A status		State of wire-pair A
Xcvr Op State: Data Mode		Operating state of the receiver
Last Fail Op State		Operating state of the receiver when the last negotiation
		failed
Frame Sync		State of frame synchronization
Line Rate(Kbps)		Negotiated wire-pair speed
Wire Type		Wire type: four-wire, or two-wire
SNR Margin(dB)		Margin to SNR
Loop Attenuation(dB)		Loop attenuation
RecvGain(dB)		Receive gain
TxPower(dBm)		Transmit power
Power Backoff		State of power compensation
Power Backoff Level		Level of power compensation
Tip/Ring Reversal		State of Tip/Ring reverse
FrmOH Stat		Frame outflow state
Rmt Encoder A		Encoding coefficient A
Rmt Encoder B		Encoding coefficient B
Rmt NSF Cusdata		Remote NSF user data
Rmt NSF CusID		Remote NSF user ID
Rmt Country Code		Remote country code