3Com MSR 50, MSR 30 manual Display history-command, Display hotkey, Syntax display history-command

2415

display history-command

Syntax display history-command

View Any view

Parameter None

Description Use the display history-commandcommand to display commands saved in the history buffer.

The system will save validated history commands performed last in current user view to the history buffer, which can save up to ten commands by default. You can use the history-commandmax-sizecommand to set the size of the history buffer. Refer to “history-commandmax-size” on page 2460 for related configuration.

Example # Display validated history commands in current user view (the display information varies with configuration).

<Sysname> display history-command

display history-command

system-view

vlan 2

quit

display hotkey

Syntax	display hotkey
View	Any view
Parameter	None
Description	Use the display hotkey command to display hotkey information.
Example	# Display hotkey information.
	<Sysname> display hotkey
	----------------- HOTKEY -----------------
		=Defined hotkeys=
	Hotkeys	Command
	CTRL_G	display current-configuration
	CTRL_L	display ip routing-table
	CTRL_O	undo debug all
		=Undefined hotkeys=
	Hotkeys	Command
	CTRL_T	NULL
	CTRL_U	NULL