3Com MSR 30, MSR 50 Max-call in voice entity view, Related command max-call in voice entity view

2630 CHAPTER 174: DIAL PLAN CONFIGURATION COMMANDS

max-number: Maximum number of call connections in a maximum-call-connection set, in the range of 1 to 120.

all: Specifies all the maximum-call-connection sets.

Description Use the max-callcommand to configure maximum-call-connection sets.

Use the undo max-callcommand to remove the specified maximum-call-connection set or all maximum-call sets.

By default, no maximum-call-connection sets are configured.

Together with the max-callcommand in voice entity view, this command is used to limit the maximum number of call connections of a voice entity or a set of voice entities.

Related command: max-call (in voice entity view).

Example # Set the maximum number of call connections in maximum-call-connection set 1 to 5.

<Sysname> system-view

[Sysname] voice-setup

[Sysname-voice] dial-program

[Sysname-voice-dial] max-call 1 5

max-call (in voice entity view)

Syntax max-callset-number

undo max-call

View POTS/VoIP/VoFR voice entity view

Parameter set-number: Number identifying a maximum-call-connection set (number of the maximum-call-connection set configured in voice dial program view), in the range of 1 to 2147483647.

Description Use the max-callcommand to bind a voice entity to the maximum-call-connection set specified by the set-numberargument.

Use the undo max-callcommand to remove the binding. Although you can bind each voice entity to only one maximum-call-connection set, you can change the binding.

By default, no maximum-call-connection set is bound, that is, there is no limitation on the number of call connections.

This command is used together with the max-callcommand in voice dial program view. The former is used to bind a voice entity to a maximum-call-connection set,