3Com MSR 30, MSR 50 manual Garp timer, Related command garp timer, garp timer leaveall

412CHAPTER 23: GARP CONFIGURATION COMMANDS

defined without the to interface-typeinterface-numberportion comprises only one port.

Description Use the display garp timer command to display GARP timers.

Note that:

■If the interface interface-listkeyword-argument combination is not specified, this command displays the GARP timer settings of all the ports.

■If the interface interface-listkeyword-argument combination is specified, this command displays the GARP timer settings of the specified ports.

Related command: garp timer, garp timer leaveall.

Example # Display GARP timers on port Ethernet 1/0.

<Sysname> display garp timer interface ethernet 1/0 GARP timers on port Ethernet1/0

Garp Join Time		: 20		centiseconds
Garp Leave Time		: 60		centiseconds
Garp	LeaveAll Time	:	1000 centiseconds
Garp	Hold Time	:	10	centiseconds

garp timer

Syntax garp timer { hold join leave } timer-value

undo garp timer { hold join leave }

View Ethernet interface view, port group view

Parameter hold: Sets the hold timer. join: Sets the join timer. leave: Sets the leave timer.

timer-value: Timer setting (in centiseconds), which must be a multiple of 5.

Description Use the garp timer command to set a GARP timer for an Ethernet port or all ports in a port group in compliance with the timer setting dependencies shown in Table 53.

Use the undo garp timer command to restore the default of a GARP timer. This may fail if the default does not satisfy the dependencies shown in Table 53.

By default, the hold timer, the join timer, and the leave timer are set to 10 centiseconds, 20 centiseconds, and 60 centiseconds.