3Com MSR 50, MSR 30 manual Display ip interface brief, Related command display ip interface, 783

783

Table 154 Description on fields of the display ip interface command

Field	Description
DHCP packet deal mode	DHCP packet processing mode. This field
	appears on a DHCP-supporting device and
	can be one of the following values:
	■ global: The DHCP server with the global
	address pool is enabled on the
	interface.
	■ relay: The DHCP relay agent is enabled
	on the interface.

display ip interface brief

Syntax display ip interface brief [ interface-type [ interface-number ] ]

View Any view

Parameter interface-type: Interface type.

interface-number: Interface number.

Description Use the display ip interface brief command to display brief information about a specified or all Layer 3 interfaces.

Without the interface type and interface number specified, information about all layer 3 interfaces is displayed; with only the interface type specified, the information about all layer 3 interfaces of the specified type is displayed; with both the interface type and interface number specified, only the information about the specified interface is displayed.

Note that:

If you have configured the time slots of a CE1/PRI or CT1/PRI interface as an ISDN PRI group using the pri-setcommand, then executing the display ip interface brief command only displays the time slot used by the control channel (D channel), instead of the ones used by the user channels (B channels). For details about CE1/PRI and CT1/PRI interfaces, refer to “Fundamental CE1/PRI Interface Configuration Commands” on page 201 and “Fundamental CT1/PRI Interface Configuration Commands” on page 213.

Related command: display ip interface.

n E1/T1 interfaces are time slotted. Using the pri-set command can bind time slots of an E1/T1 interface into an ISDN PRI group, with each time slot corresponding to a serial interface. To make the displayed output simple and clear, only the time slot of the control channel (D channel) is displayed regardless of whether the display ip interface brief command has an interface included or not.

Example # Display brief information about Ethernet 1/0.