3Com MSR 30, MSR 50 manual Timer first-dial, Timer hookoff-interval

2612 CHAPTER 173: VOIP CONFIGURATION COMMANDS

timer first-dial

Syntax timer first-dial seconds

undo timer first-dial

View FXS/FXO voice subscriber line view

Parameter seconds: Maximum interval in seconds between off-hook and dialing the first digit, in the range of 1 to 300.

Description Use the timer first-dialcommand to configure the maximum interval between off-hook and dialing the first digit.

Use the undo timer first-dialcommand to restore the default setting.

By default, the maximum interval between off-hook and dialing the first digit is 15 seconds.

Upon the expiration of the timer, the subscriber will be prompted to hook up and the call is terminated.

Example # Set the maximum interval between off-hook and dialing the first digit to 10 seconds.

<Sysname> system-view [Sysname] voice-setup [Sysname-voice] subscriber-line 1/0

[Sysname-voice-line1/0] timer first-dial 15

timer hookoff-interval

Syntax timer hookoff-interval milliseconds

undo timer hookoff-interval

View FXO voice subscriber line view

Parameter milliseconds: Interval between on-hook and off-hook in milliseconds, in the range of 500 to 4,000.

Description Use the timer hookoff-intervalcommand to configure the interval between on-hook and off-hook.

Use the undo timer hookoff-intervalcommand to restore the default.

By default, the interval between on-hook and off-hook is 500 milliseconds.

In the delay off-hook mode, the on-hook/off-hook state between FXS and FXO voice subscriber lines is consistent. When an FXS voice subscriber line goes