3Com MSR 30 Reset encrypt-card fast-switch, Reset ipsec sa, Syntax reset encrypt-card fast-switch

2142 CHAPTER 140: IPSEC CONFIGURATION COMMANDS

[Sysname] ipsec policy policy1 100 manual [Sysname-ipsec-policy-manual-policy1-100] proposal prop1

reset encrypt-card fast-switch

Syntax reset encrypt-card fast-switch

View User view

Parameter None

Description Use the reset encrypt-cardfast-switchcommand to clear encryption card fast switching entries.

Note that:

■This command clears all the fast switching entries. All IP fast switching entries using the encryption card interface as the inbound interface or outbound interface will also be cleared.

■Once cleared by this command, the fast switching entries cannot be restored.

■Some other actions or events can also clear encryption card fast switching entries, such as disabling the encryption card, resetting the encryption card, hot plugging the encryption card, unbinding a policy and clearing the SA.

Related command: display encrypt-cardfast-switch.

Example # Clear all encryption card fast switching entries.

<sysname> reset encrypt-card fast-switch

reset ipsec sa

Syntax	reset ipsec sa [ parameters dest-address protocol spi policy policy-name
	[ seq-number ] remote ip-address ]
View	User view
Parameter	parameters dest-address protocol spi: Specifies the destination address, security
	protocol and SPI (Security Parameter Index) of an SA.
	dest-address: Destination address in dotted decimal notation.
	protocol: Security protocol, which can be keyword ah or esp, case insensitive.
	spi: Security parameter index in the range 256 to 4294967295.
	policy: Specifies an IPSec policy.