3Com MSR 50, MSR 30 manual Display mpls ldp all verbose begin exclude include

1517

Table 369 Description on the fields of the display mpls label command

Field Description

Label alloc state

’.’means not used ’$’ means used Static Label Dynamic Label

Label allocation status

’.’means that the label is not used ’$’ means that the label is used Static labels

Dynamic labels

display mpls ldp

Syntax	display mpls ldp [ all [ verbose ] ] [ { begin exclude include }
	regular-expression ]
View	Any view
Parameter	all: Displays all LDP information.
	verbose: Displays detailed information.
	: Filters the output information.
	begin: Begins with the specified string.
	include: Includes the specified string.
	exclude: Excludes the specified string.
	regular-expression: Regular expression, a string of 1 to 80 characters. No blank
	space is acceptable.
Description	Use the display mpls ldp command to display information about LDP.
	If you do not specify any parameter, the command will display all LDP information
	in detail.
Related command:	mpls ldp (system view), mpls ldp (interface view).

Example # Display all LDP information in detail.

<Sysname>	display mpls ldp all verbose
		LDP Global Information
---------------------------------------------------------------
Protocol	Version	: V1	Neighbor Liveness	: 60 Sec
Graceful	Restart	: Off	FT Reconnect Timer	: 60 Sec
MTU Signaling		: On	Recovery Timer	: 60 Sec
		LDP Instance Information
---------------------------------------------------------------
Instance	ID	: 0	VPN-Instance	:
Instance	Status	: Active	LSR ID	: 1.1.1.1
Hop Count Limit		: 32	Path Vector Limit	: 32
Loop Detection		: Off