3Com MSR 50, MSR 30 Bridging Configuration Commands, Bridge aging-time, Bridge bridge-set enable

BRIDGING CONFIGURATION

36 COMMANDS

bridge aging-time

Syntax bridge aging-time seconds

undo bridge aging-time

View System view

Parameters seconds: Aging time of dynamic bridge table entries, in seconds, with an effective range of 10 to 1000000.

Description Use the bridge aging-timecommand to configure the aging time of dynamic bridge table entries.

Use the undo bridge aging-timecommand to restore the default setting.

By default, the aging time of dynamic bridge table entries is 300 seconds.

Example # Set the aging time of dynamic bridge table entries to 500 seconds.

<Sysname> system-view

[Sysname] bridge aging-time 500

bridge bridge-set enable

Syntax bridge bridge-setenable

undo bridge bridge-setenable

View System view

Parameters bridge-set: Bridge set number, an integer in the range of 1 to 255.

Description Use the bridge bridge-setenable command to enable a bridge set.

Use the undo bridge bridge-setenable command to remove a bridge set.

n ■ Before you can enable the bridge set feature, you need to enable bridging first.

■Other related configurations can take effect only if the bridging and bridge set features are enabled. This command is required for bridge configuration.