3Com MSR 50, MSR 30 manual Related command Ppp mp user Example, Ppp mp max-bind max-bind-num

	517
View	Virtual template interface view, dialer interface view
Parameter	authentication: Performs MP binding according to PPP authentication username.
	both: Performs MP binding according to both the PPP authentication username
	and the endpoint descriptor.
	descriptor: Performs the MP binding according to the endpoint descriptor.
Description	Use the ppp mp binding-modecommand to set the MP binding mode.
	Use the undo ppp mp binding-modecommand to restore the default MP
	binding mode.
	By default, MP binding is based on both the PPP authentication username and the
	endpoint descriptor.
	The username is the peer’s username received while performing PAP or CHAP
	authentication. The endpoint descriptor, which uniquely specifies a device, refers
	to the peer’s endpoint descriptor received when performing LCP negotiation.
	Based on the username or endpoint descriptor, the system can locate the specified
	VT interface and create a MP binding according to the configuration on the
	template.
	Note that:
	■ When MP binding is only based on descriptors, users cannot be differentiated.
	So, to bind users to different groups, use the keyword both in the command.
	■ When MP binding is only based on authentication usernames, peer devices
	cannot be differentiated. So, when multiple peer devices exist, use the keyword
	both in the command.
Related command:	ppp mp user.
Example	# Perform MP binding based on PPP authentication username.
	<Sysname> system-view
	[Sysname] interface dialer 0
	[Sysname-Dialer0] ppp mp binding-mode authentication
ppp mp max-bind
Syntax	ppp mp max-bind max-bind-num
	undo ppp mp max-bind
View	Virtual template interface view, dialer interface view
Parameter	max-bind-num: Specifies the maximum number of links which can be bound, in
	the range 1 to 128.