3Com MSR 50, MSR 30 manual Cut connection, Domain , radius scheme

	1931
View	ISP domain view
Parameter	radius-schemeradius-scheme-name: Specifies a RADIUS scheme by its name,
	which is a string of 1 to 32 characters.
Description	Use the authorization voip command to specify the authorization scheme for
	VoIP users.
	Use the undo authorization voip command to restore the default.
	By default, the default authorization scheme configured is used for VoIP users.
	Note that:
	■ The RADIUS scheme specified for the current ISP domain must have been
	configured.
	■ You must have created a RADIUS scheme before using the authorization voip
	command.
	■ The scheme specified in this command must be the same with authentication
	scheme, otherwise authorization will fail.
	■ To implement authorization, you must enable the authorization function and
	meanwhile have the authorization scheme configured.
Related command:	domain, radius scheme
Example	# In the default ISP domain system, configure the RADIUS authorization scheme
	for voice users to rd.

<Sysname> system-view [Sysname] domain system

[Sysname-isp-system] authorization voip radius-scheme rd

cut connection

Syntax cut connection { access-type{ dot1x mac-authenticationportal isp-name interface interface-type interface-number ip ip-address ucibindex ucib-index user-nameuser-name vlan vlan-id }

}all domain mac mac-address

View System view

Parameter access-type: Specifies user connections of an access mode.

■dot1x: Specifies 802.1x authentication user connections.

■mac-authentication: Specifies MAC authentication user connections.

■portal: Specifies portal authentication user connections.

all: Specifies all user connections.