3Com MSR 50 Reset radius statistics, Reset stop-accounting-buffer, Syntax reset radius statistics

1963

NAS transmits the request for the specified maximum number, it sends another trap message.

■If the specified maximum number of transmission attempts is odd, the half of the number refers to the smallest integer greater than the half of the number.

Example # Enable the RADIUS trap function for accounting servers.

<Sysname> system-view

[Sysname] radius trap accounting-server-down

reset radius statistics

Syntax reset radius statistics

View User view

Parameter None

Description Use the reset radius statistics command to clear RADIUS statistics.

Related command: display radius scheme.

Example # Clear RADIUS statistics.

<Sysname> reset radius statistics

reset stop-accounting-buffer

Syntax	reset stop-accounting-buffer { radius-scheme radius-scheme-namesession-id
	session-id time-rangestart-time stop-time user-nameuser-name }
View	User view
Parameter	radius-schemeradius-scheme-name: Specifies a RADIUS scheme by its name,
	which is a string of 1 to 32 characters.
	session-idsession-id: Specifies a session by its ID, a string of 1 to 50 characters.
	time-rangestart-timestop-time: Specifies a time range by its start time and end
	time in the format of hh:mm:ss-mm/dd/yyyy or hh:mm:ss-yyyy/mm/dd.
	user-nameuser-name: Specifies a user name based on which to reset the
	stop-accounting buffer. The username is a case-sensitive string of 1 to 80
	characters. The format of the user-nameargument (for example, whether the
	domain name should be included) must comply with that specified for usernames
	to be sent to the RADIUS server in the RADIUS scheme.