3Com MSR 50 Poe utilization-threshold, Poe-profile, Undo poe utilization-threshold pse pse-id

2505

poe utilization-threshold

Syntax poe utilization-thresholdutilization-threshold-value [ pse pse-id ]

undo poe utilization-threshold [ pse pse-id]

View System view

Parameter utilization-threshold-value: Power alarm threshold in percentage, in the range 1 to 99.

pse pse-id: Specifies a PSE ID. The support for this argument varies with devices. pse-idindicates number of the slot where a PoE interface locates.

Description Use the poe utilization-thresholdcommand to configure a power alarm threshold for the PSE.

Use the undo poe utilization-thresholdcommand to restore the default power alarm threshold of the PSE.

By default, the power alarm threshold for the PSE is 80%.

The system sends a Trap message when the percentage of power utilization exceeds the alarm threshold. If the percentage of the power utilization always keeps above the alarm threshold, the system does not send any Trap message. Instead, when the percentage of the power utilization drops below the alarm threshold, the system sends a Trap message again.

Example # Set the power alarm threshold of PSE 2 to 90%.

<Sysname> system-view

[Sysname] poe utilization-threshold 90 pse 2

poe-profile

Syntax poe-profileprofile-name [ index ]

undo poe-profile { index index name profile-name}

View System view

Parameter profile-name: Name of a PoE configuration file, a string of 1 to 15 characters. A PoE configuration file name begins with a letter (a through z or A through Z) and must not contain reserved keywords such as undo, all, name, interface, user, poe, disable, max-power, mode, priority and enable.

index: Index number of a PoE configuration file, in the range of 1 to 100.

Description Use the poe-profileprofile-namecommand to create a PoE configuration file and enter PoE-profile view.