3Com MSR 50, MSR 30 manual Fast-connect, Related command Line Example, Undo fast-connect

2595

	Use the undo entity command to remove the existing voice entity.
	In a global view, use the entity command to enter a voice entity view, and use
	quit to return to the dial program view.
n	The entity-number assigned to a VoIP or POTS entity must be unique among all
	VoIP and POTS entities.
Related command:	line.
Example	# Create and enter the voice entity view to configure a POTS voice entity whose
	identification is 10.
	<Sysname> system-view
	[Sysname] voice-setup
	[Sysname-voice] dial-program
	[Sysname-voice-dial] entity 10 pots
fast-connect
Syntax	fast-connect
	undo fast-connect
View	VoIP entity view
Parameter	None
Description	Use the fast-connectcommand to enable fast connection for H.323 calls.
	Use the undo fast-connectcommand to disable fast connection.
	By default, fast connection is disabled.
	As there is no ability negotiation for fast connection mode, the ability confirmation
	of the two parties is determined by the called gateway. When the router acts as an
	originating gateway, you can set whether or not to apply fast connection mode for
	each originated call. When the router acts as a terminating gateway, the
	configuration of the voip called-startcommand will determine whether fast
	connection is used for call initialization.
	Fast connection procedure will be used when both the calling and called parties
	support fast connection. Provided that neither the calling nor the called gateway
	supports fast connection mode, the system will automatically switch to normal
	connect procedure to resume the call.
	It is OK to only configure fast-connectcommand for VoIP voice entity on the
	calling gateway. Just after successfully enabling fast connection can the tunnel
	function be configured.

Related command: outband, tunnel-on, and voip called-start.