3Com MSR 30, MSR 50 manual Peer enable, Peer filter-policy BGP-VPNv4 subaddress family view

1700 CHAPTER 98: MPLS L3VPN CONFIGURATION COMMANDS

Related command: peer upe.

Example # In BGP-VPNv4 subaddress family view, specify to advertise default routes of VPN instance vpn1 to peer 1.1.1.1.

<Sysname> system-view [Sysname] bgp 100

[Sysname-bgp-af-vpnv4] peer 1.1.1.1 enable

[Sysname-bgp-af-vpnv4] peer 1.1.1.1 upe

[Sysname-bgp-af-vpnv4] peer 1.1.1.1 default-route-advertise vpn-inst ance vpn1

peer enable

Syntax peer { group-name ip-address } enable

undo peer { group-name ip-address } enable

View BGP-VPNv4 subaddress family view/BGP-L2VPN address family view

Parameter group-name: Name of the peer group, a string of 1 to 47 characters.

ip-address: IP address of the peer.

Description Use the peer enable command to enable a peer or peer group for an address family and enable the exchange of BGP routing information of the address family.

Use the undo peer enable command to disable the capability.

By default, only IPv4 routing information is exchanged between BGP peers/peer groups.

Example # Configure peer 1.1.1.1 and enable the peer for the BGP-VPNv4 subaddress family.

<Sysname> system-view [Sysname] bgp 100

[Sysname-bgp] peer 1.1.1.1 as-number 100

[Sysname-bgp] ipv4-family vpnv4 [Sysname-bgp-af-vpnv4] peer 1.1.1.1 enable

# Configure peer 1.1.1.1 and enable the peer for the BGP-L2VPN address family.

<Sysname> system-view [Sysname] bgp 100

[Sysname-bgp] peer 1.1.1.1 as-number 100

[Sysname-bgp] l2vpn-family [Sysname-bgp-af-l2vpn] peer 1.1.1.1 enable

peer filter-policy (BGP-VPNv4 subaddress family view)

Syntax peer { group-nameip-address} filter-policy acl-number{ export import }