3Com MSR 30 Mpls te path explicit-path, Mpls te path metric-type, Related command mpls te metric

1628 CHAPTER 96: MPLS TE CONFIGURATION COMMANDS

mpls te path explicit-path

Syntax mpls te path explicit-path pathname

undo mpls te path

View Tunnel interface view

Parameter pathname: Name of an MPLS-TE explicit path, a string of 1 to 31 characters.

Description Use the mpls te path explicit-pathcommand to associate an explicit path with the tunnel.

Use the undo mpls te path command to remove the association.

Example # Configure interface Tunnel0 to use the explicit path named path1.

<Sysname> system-view

[Sysname] interface tunnel 0

[Sysname-Tunnel0] mpls te path explicit-path path1

mpls te path metric-type

Syntax mpls te path metric-type { igp te }

undo mpls te path metric-type

View MPLS view, tunnel interface view

Parameter igp: Uses IGP metric for tunnel routing. te: Uses TE metric for tunnel routing.

Description Use the mpls te path metric-typecommand in MPLS view to specify the link metric type used for routing tunnels not configured with link metric type.

Use the mpls te path metric-typecommand in tunnel interface view to specify the link metric type used for routing current tunnel.

Use the undo mpls te path metric-typecommand to restore the default. This undo form is only available in tunnel interface view.

By default, TE metrics of links are used in path calculation for TE tunnels.

Related command: mpls te metric.

Example In MPLS view: