3Com MSR 30, MSR 50 manual Poe enable pse, Poe legacy enable

2498 CHAPTER 166: POE CONFIGURATION COMMANDS

	# Enable PoE through a PoE configuration file on a PoE interface.
	<Sysname> system-view
	[Sysname] poe-profile abc
	[Sysname-poe-profile-abc-1] poe enable
	[Sysname-poe-profile-abc-1] quit
	[Sysname] interface ethernet 1/1
	[Sysname-Ethernet1/1]apply poe-profile name abc
poe enable pse
Syntax	poe enable pse pse-id
	undo poe enable pse pse-id
View	System view
Parameter	pse-id: PSE ID. pse-idindicates number of the slot where a PoE interface locates.
Description	Use the poe enable pse command to enable PoE for the PSE.
	Use the undo poe enable pse command to disable PoE for the PSE.
	By default, PoE is disabled for the PSE.
n The support for this command varies with devices.
Example	# Enable PoE for PSE 2.
	<Sysname> system-view
	[Sysname] poe enable pse 2
poe legacy enable
Syntax	poe legacy enable [ pse pse-id]
	undo poe legacy enable [ pse pse-id]
View	System view
Parameter	pse pse-id: Specifies a PSE ID. The support for the argument varies with devices.
	pse-idindicates number of the slot where a PoE interface locates.
Description	Use the poe legacy enable command to enable the PSE to detect nonstandard
	PDs.

Use the undo poe legacy enable command to disable the PSE from detecting nonstandard PDs.