3Com MSR 50, MSR 30 manual Plc-mode, Syntax plc-mode general specific Undo plc-mode, 2603

2603

g726r16: Packetization period in milliseconds for g726r16 codec, an integral multiple of 10 in the range of 10 to 110, with a default of 30.

g726r24: Packetization period in milliseconds for g726r24 codec, an integral multiple of 10 in the range of 10 to 70, with a default of 30.

g726r32: Packetization period in milliseconds for g726r32 codec, an integral multiple of 10 in the range of 10 to 50, with a default of 30.

g726r40: Packetization period in milliseconds for g726r40 codec, an integral multiple of 10 in the range of 10 to 40, with a default of 30.

g729: Packetization period in milliseconds for g729r8 or g729a codec, an integral multiple of 10 in the range of 20 to 180, with a default of 30.

time-length: DSP packetization period for a codec.

Description Use the payload-sizecommand to configure the voice packetization period for different codecs.

Use the undo payload-sizecommand to restore the default.

By default, the voice packetization period for g971 is 20 milliseconds, and that for g723, g726, and g726 is 30 milliseconds.

In voice dial program view, you can configure global attributes for voice entities, namely, the default voice packetization period of the DSP for each codec.

Related command: default entity payload-size,entity compression.

Example # Set the voice packetization period of the DSP for g711 codec to 30 milliseconds.

<Sysname> system-view [Sysname] voice-setup [Sysname-voice] dial-program [Sysname-voice-dial] entity 10 pots

[Sysname-voice-dial-entity10] payload-size g711 30

#Restore the default voice packetization period of the voice entity for g9711 codec.

[Sysname-voice-dial-entity10] undo payload-size g711

plc-mode

Syntax plc-mode { general specific }

undo plc-mode

View Analog FXS/FXO voice subscriber line view

Parameter general: Uses the universal frame erasure algorithm.