3Com MSR 50, MSR 30 manual 126, 802.1X Configuration Commands, Display dot1x

126

802.1X CONFIGURATION COMMANDS

display dot1x

Syntax display dot1x [ sessions statistics ] [ interface interface-list]

View Any view

Parameter sessions: Displays 802.1x session information.

statistics: Displays 802.1x statistics.

interface interface-list: Specifies an Ethernet port list, which can contain multiple Ethernet ports. The interface-listargument is in the format of interface-list=

{interface-type interface-number [ to interface-type interface-number ] } & <1-10>, where interface-type represents the port type, interface-number represents the port number, and & <1-10> means that you can provide up to 10 port indexes/port index lists for this argument. The start port number must be smaller than the end number and the two ports must be of the same type.

Description Use the display dot1x command to display information about 802.1x, including session information, statistics, or configuration.

With both the sessions keyword and the statistics keyword not provided, this command displays 802.1x configuration information.

Related commands: reset dot1x statistics, dot1x, dot1x retry, dot1x max-user,dot1x port-control,dot1x port-method,dot1x timer.

Example # Display 802.1x configuration information.

<Sysname> display dot1x
Global Equipment 802.1X	protocol is enabled
CHAP authentication is enabled
Proxy trap checker is disabled
Proxy logoff checker is	disabled
Configuration: Transmit	Period	30	s,	Handshake Period		15 s
Quiet Period		60	s,	Quiet Period Timer is disabled
Supp Timeout		30	s,	Server Timeout		100 s
The maximal retransmitting				times	3
Total maximum 802.1x user resource		number		is 1024 per slot
Total current used 802.1x resource		number		is 0

Ethernet1/1 is link-up 802.1X protocol is disabled