Philips V26CT, V24CT manual Set you require. The universal settings for the selected

Setting up your Monitor

Changing the Configuration Set

•Remove the plug-in modules from the rack before starting the procedure.

•Ask your biomedical engineering department or Philips service engineer to set Parameter Settings Transfer to OFF.

Procedure The current Configuration Set for the monitor is highlighted and the universal settings are displayed at the top of the Task Window.

1.	Press the softkey	Change ConfSet			to select the Configuration
	Set you require. The universal settings for the selected
	Configuration Set are displayed.
2.	Press the hardkey			to switch to the selected set.
			Confirm

Wait at least one minute before plugging in or removing any modules from the rack.

3-54 Setting up your Monitor