Philips V24CT, V26CT manual Neonatal Event Review Recordings, Tabular

Neonatal Event Review Recordings

Neonatal Event Review Recordings

Tabular	You can record the contents of the Event Review task window in a
Neonatal	tabular format on an M1116A/B plug-in recorder. The recorder selection
Event	must be set to “PLUG-IN” (the default) in the Procedure Recordings task
Recordings	window before neonatal events can be recorded.
	You can access the Procedure Recordings task window by selecting:
	•		on the control panel and
		Monitor Setup
	•			in the Monitor Setup selection window.
		Recordng Setup

Note—Neonatal Event Review recordings can only be made on the M1116B plug-in recorder. The M1116A plug-in recorder, the M1117A four channel recorder, and the central recorder do not support Neonatal Event Review recordings.

Header Information

Each neonatal event recording begins with general information such as the recording date, time, patient’s name, medical record number and the bed label. Beneath this, comes the Event Summary information including the total number of stored events and their respective event categories. See the “Neonatal Event Review” section of this manual (Chapter 9, Volume 1) for further details on event categories.

Neonatal Event Data

A tabular recording of neonatal event data includes the following information:

1.The date and time the event was captured

2.The event labels (Brady, Desat and Apnea Duration). For reference purposes, the event labels are reprinted after every 8 columns. For filing purposes, the recording strip can be cut after every 8 columns and attached to a standard sized sheet of paper.

3.The trigger event, which is underlined

Recording Functions

Recording Functions 6-33