Philips V26CT, V24CT manual Bradycardia

Neonatal Event Review

Adjusting Neonatal Event Review Settings

Bradycardia	Alarm Triggered
Event Settings	The Bradycardia event is triggered by a Red*** Brady alarm.
	The Bradycardia alarm limit can be viewed but not adjusted in the Event
	Setup task window. The alarm limit must be adjusted in Monitoring
	Mode in the HR/PULSE or Alarm Limits task window and the trigger
	time must be adjusted in Configuration Mode in the HR/PULSE task
	window.
	If the Bradycardia alarm related trigger threshold and trigger time items
	are selected, the		key is inactive and the following
		Change Content
	status message is displayed in the Event Setup task window:
	• “Brady items must be changed in the HR/PULSE Setup”
	User Defined
	For situations where the storage and documentation of an event should
	be independent of all Bradycardia alarms, you can adjust the
	Bradycardia event threshold and trigger time in Monitoring Mode in
	the Event Setup task window.
	Note—When the patient monitor is connected to an Arrhythmia System,
	the Bradycardia alarms are generated by the latter and not the former.
	The alarm limits can only be viewed and adjusted on the Arrhythmia. In
	this situation, the Bradycardia threshold line is displayed in the Event
	Review task window as a shaded area and the Brady trigger time and
	threshold items are set to “From Arrhyth” in the Event Setup task
	window.

9-20 Neonatal Event Review