Philips V26CT, V24CT manual 135/72

Adjusting the Volume Control

2.Press Monitor Setup to return to the Selection Window or Main Screen to return to the Main Screen.

Note—Tone Modulation can also be set to On or Off in this window using the On/Off Tone Mod key. (see also SpO2 Module chapter in Volume 2)

Note—If the alarm tone volume is set to zero the warning

“ALARM VOL = 0” will appear in the lower right corner of the display.

V24 and V26 Patient Monitor:

If not already in the Main Screen, press Main Screen .

Increase or decrease the QRS or alarm tone volume by pressing the corresponding softkeys directly under the Alarm Volume and QRS Volume indicators.

Setting up your Monitor

CHANNEL #1

LAYOUT: #1 NON-OVERLAP

CHANNEL #2

CHANNEL#3

CHANNEL #4

			ICU	Adult	10 JAN 95 20:05	HR		PULSE	70
II						70			NUMERICS
F HR
							0.3
						ST1
						ST2	-0.2
	1mV
						ABP
ABP						135/72 (94)
						PAP
	0					34/16
						(23)
PLETH						SpO2
	SpO2					97
		SQI
CO2	40					ETCO2
	0					20
							0	NBP
						IMCO 2			19:47
						AWRR	37	115/65
								(81)
	Alarm Vol 165		QRS Vol 150

3-36 Setting up your Monitor