Philips V24CT, V26CT manual Discharging, Ending a, Case

Admitting a Patient

Discharging

Patient data for the current patient can be erased in the Patient

a Patient/

Information Task Window under

-->

Procedures

Discharge Pati

ent

Ending a

(ICU configuration sets) or the End Case Task Window under

Case

-->

(OR configuration sets).

Procedures

End Case

Discharge Pati

ent

in ICU Configuration Sets erases the entire patient database. You must

press

for the discharge to take effect. The system returns to the

Confirm

Admit Patient Task Window.

in OR Configuration Sets also

End Case

erases the entire database.

Additionally,

the monitor resets all settings to

the user defaults and then returns to Monitor Standby. You must press

for the discharge to take effect. If configured, a scheduled

Confirm

report is printed prior to ending the case.

Note—In ICU configuration not all settings are automatically reset to user

defaults. To do this manually press

-->

Monitor Setup

Adult/Pedi/Ne

o

-->

. Do not change the selection

and then press

Change ConfSet

Confirm .

If the monitor is connected to a Philips Documentation Center and arrhythmia is assigned, arrhythmia must be unassigned under

Arrhyth Functns . If the monitor is connected to a Philips central

station, discharge must be performed at central as well. The discharge procedure is not complete until the patient's information is erased from all parts of the system and the system is available for a new patient.

During a transfer to or from the M1235A Data Transfer Module, the

Discharge Patient and End Case Task Windows are not available.

Admit/Discharge/End Case

Admit/Discharge/End Case 7-9