Philips V26CT, V24CT manual Setting Volume Control

Alarm Setup

Setting the

Volume

Control

The QRS and the alarm tone volume can be set independently.

1.	Press	Alarms/Volume	hardkey.
2.	Press		in the Alarms Selection Window.
		Volume Control

The QRS and alarm tone are each represented by the outline of a triangle which can be filled in. When the triangle is completely filled, this represents maximum tone volume.

3.Press the up and down arrow softkeys to fill each triangle to the required amount. If there is no current alarm or INOP, two short alarm tones will sound each time the alarm tone keys are pressed so that you can hear the effect of changing the volume.

4. Press Main Screen to return to the Main Screen.

Note—The QRS tone can be derived from other sources than ECG such as pressure or pleth. See Chapter 14, “ECG and ECG/Respiration Module Section” for more details.

Note—Tone Modulation can also be set to On or Off in this window using the On/Off Tone Mod. key.

Alarm Functions

5-14 Alarm Functions