Philips V26CT, V24CT manual Connectors M1046B Computer Module, For 100

Controls and Connectors

Connectors of

the M1046B

Computer

Module

The connectors on the front panel of the computer module are:

1.Local Power Connector; a 3-pin, 90° connector is used to input the local line voltage.

2.Rack Connector; female interface connector used to connect a satellite rack to the computer module.

3.ECG Output; used to output an ECG wave to synchronize a defibrillator and provide an input for the defibrillator marker signal.

4.Power-on LED.

5.Two fuse holders for the line protection fuses:

for 200 - 240V	3.15 amps 250V
for 100 - 120V	3.15 amps 250V

11-20 Monitor Installation and Patient Safety