Philips V26CT, V24CT manual Aligned Numerics, Numeric Positions

Setting up your Monitor

Selecting Realtime Wave Speeds

If numerics are switched off, the status message “Not all numerics displayed” is displayed. This message can be disabled in configuration mode by your biomedical engineer or by the Philips service engineer.

Numeric Parameter numerics on the Main Screen screen are shown as aligned Positioning numerics - the numerics are next to the corresponding waveforms.

Aligned Numerics:

The monitor controls the position of numerics on the screen, and also controls the size of some numerics.

Numeric Positions:

Numerics are positioned on the screen in the following order:

1.Parameters with waveforms (such as Pressure) are positioned first. The numerics are aligned with the corresponding waveform.

2.Numerics, which are part of a contiguous block (i.e. CO2, AGM, ST, BIS, HR/PULSE) are positioned next.

3.Parameters without waveforms which are not part of a contiguous block (such as Temperature) are positioned in the left column if space is available. Otherwise, they are placed from bottom to top in a column to the right of the waveform numerics according to their priority as shown in the Numerics On/Off Task Window.

3-18 Setting up your Monitor