Philips V24CT, V26CT manual Adjusting, Screen, Contrast

Attaching the Patient

Adjusting	V24 and V26:
Screen	The brightness or contrast of the screen display can be adjusted by using
Contrast	the dial located behind the edge of the display, on the lower right side of
	the monitor. The V24 uses a contrast control. V24C, V24CT, V26C and
	V26CT are equipped with a brightness control. Make sure that all of the
	screen information is visible.

Screen Brightness Control

(Model V24C, V26C

V24CT, V26CT)

Screen Contrast Control

(Model V24)

CMS:

The brightness and contrast of the screen display can be adjusted by means of the two dials underneath the hardkeys.

Follow this procedure to achieve the optimum screen display:

1.Turn the brightness and contrast controls to their maximum settings.

2.Slowly turn the brightness and contrast controls down to the lowest acceptable position where the display can still be seen clearly. The most acceptable position will be dependent upon the surrounding light conditions. Please ensure that all the screen information is visible.

Getting Started

Getting Started 2-7