Philips V24CT, V26CT Enter the password by pressing the appropriate combination, Becomes active

Setting up your Monitor 3-57

Changing Operating Modes

Procedure	1.	Enter the password by pressing the appropriate combination of
		softkeys which are numbered 1-5.
		If you enter the password correctly, you can proceed with the next
		step. If not, exit the Task Window by pressing							and try
								Main Screen
		again.
	2.	Press the softkey			. Move the highlighting to the
			Change Opmode
		mode you require.
	3. The prompt message “Press CONFIRM to switch to selected mode“
		appears. Press the hardkey				.
				Confirm
		The instrument goes through the boot-up sequence and reverts
		automatically to default settings and the mode of your choice
		becomes active.
	Note—If you have entered either Config, Service or Demo Mode
	successfully, it is possible to return to Monitoring Mode without entering
	a password by pressing
			Monitor Setup				Resume Monitor

Setting up your Monitor