Philips V26CT, V24CT manual Assembling V24 V26, Lifting the Display Module

Controls and Connectors

Assembling

the V24 and

V26

The monitors consist of two individual parts.

1.One of two types of Display Modules, depending on the particular model monitor you have— either:

a.A monochrome display with control panel supporting the V24, or

b.A color flat panel display with control panel supporting the V24C, V24CT, V26C and V26CT

2.The Rack with Parameter Modules

To assemble the display module and parameter rack:

•Connect the parameter module rack with the front end cable to the connector on the left side of the display module.

•You now have an electrical connection from the rack to the display module and will see monitoring displays.

Lifting the Display Module

The V24, V24C and V26C display module weighs 11.3 lbs (5.1 kg). The V24CT and V26CT display module weight 14.8 lbs (6.7 kg) without batteries and 16.9 lbs (7.7 kg) with batteries. Use the monitor's handle when lifting or carrying the monitor. You may need to support the bottom of the monitor with your other hand.

C aution

If the monitor falls or is dropped, check the display for any cracks. If the display is broken contact your biomedical department or local state environmental personnel for proper disposal.

Note—At this time, Philips Medical Systems will make available on request, and in English only, such circuit diagrams, component part lists, descriptions, calibration instructions or other information which will assist the user's appropriate qualified technical personnel to repair those parts of the equipment which are classified by Philips Medical Systems to be repairable.

11-36 Monitor Installation and Patient Safety