Philips V24CT, V26CT manual Criteria, Apnea Event, Settings

		Adjusting Neonatal Event Review Settings
	The Event Setup task window enables you to adjust the following items:
	Trigger Mode	The trigger mode determines whether an
		event is triggered by a physiological alarm or
		by criteria defined specifically by the user.
	Trig Threshold	The trigger threshold can be adjusted if the
		user defined trigger mode setting has been
		selected
	Trigger Time	The trigger time can be adjusted if the user
		defined trigger mode setting has been
		selected.
Event	The event type (Apnea, Bradycardia, Desaturation) determines how a
Criteria	specific event is triggered and stored on the monitor.
Apnea Event	Apnea events are always triggered by a Red*** Apnea alarm. The Apnea
Settings	alarm is derived from the RESP parameter and occurs whenever
	breathing ceases for a period exceeding the defined Apnea alarm limit
	(usually 20 seconds).

The Apnea alarm limit and trigger time can be viewed but not adjusted in the Event Setup task window. These settings must be adjusted in Monitoring Mode, in the RESP task window.

Neonatal Event Review

Neonatal Event Review 9-19