Philips V24CT, V26CT Operating Instructions, Line power for an initial charging cycle, Amber LED

Operating Instructions

AC and DC (Battery) Operation

The following is a list of AC and battery operating instructions.

•The batteries continuously charge when the instrument is connected to AC power. Charging occurs whether the monitor is turned Off or On.

							Information	V26CTand
(line power) for an initial charging cycle.
	C aution
Philips Medical Systems recommends you fully charge the batteries
before using the V24CT for the first time. Plug the monitor into AC power
							Battery	(V24CT
	•	AC power is indicated by the			green LED indicator.
			AC Power
	•	Battery charging is indicated by the				amber LED.
				Battery Charging
		The LED indicator flashes when the batteries first start charging,
		and continues flashing until the batteries are 30 - 40% charged.

•When the batteries are 30 - 40% charged, the indicator goes from

flashing to continuously on. The Battery Charging indicator will be

on steady until the batteries are 90% charged. The Battery Charging indicator will turn off when both batteries are 90% charged or when the line power is disconnected.

•The Battery Charged green LED illuminates when the battery charging function has reached 90% charged, and will stay on steady even when the batteries are fully charged. If the line power is disconnected, this LED indicator will be turned off.

Confirm

Trends/Calc Module Setup

Delayed

Record

Battery	Battery	AC
Charging	Charged	Power

Battery Information (V24CT and V26CT only) 12-3