Philips V26CT, V24CT manual Combining Data, Time, Conversion, Database, Transfers to the Module

Combining Data

Combining Data

	In some situations, the patient name and/or ID in the monitor and
	module may not match (see Append New Data display on previous
	page). In other cases, one or both names may be blank. The Data
	Transfer Combine Task Window enables you to combine files when the
	demographic data is missing or different.
Time	Data in a monitor can be stored at either 1-minute or 12-second
Conversion	resolution, depending on the monitor's configuration. Data in a module
	is stored only at 1-minute resolution. Time conversions are done
	automatically when the resolutions are different.
	When converting data from 12-second to 1-minute resolution (that is,
	from a monitor to a module), one data sample out of 5 is selected to
	represent the minute. The sample selected is the one on the minute
	boundary.
	When transferring data from 1-minute to 12-second resolution (from a
	module to a monitor), one valid sample and 4 blanks will be used for
	each minute. The valid sample will be placed on the minute boundary.
Database	Transfers to the Module
Conversion	A module contains enough memory to store 24 hours of data for 16
	parameters at 1 minute resolution. If the data to be transferred does not
	fit in the module, then the number of hours will be reduced to fit the
	available memory.
	The following table shows the conversion between the monitor and
	module databases during a transfer to the module.

Data Transfer

10-14 Data Transfer