Philips 862478, 862474 manual Error Code Categories, Hexadecimal Code Explanation

Part 3 Using Support Functions

Hex Code	Explanation	Recommended Action
64	The SpO2 module is sending an	1.	Ensure PicoSat module is
	error message to the host CPU.		properly connected.
		2.	Replace the PicoSat module.
		3.	If problem persists, replace main
			PCB module.
?	The CO2 module is sending an	1.	Ensure Oridion module is
	error message to the host CPU.		properly connected.
		2.	Rplace the Oridion module.
		3.	If problem persists, replace main
			PCB module.
65, 66	PicoSat SpO2 module has detected	1.	Replace PicoSat module.
	an error during initialization.	2.	If problem persists, replace main
			PCB module.
6E-71	PicoSat SpO2 module has detected	1.	Replace PicoSat module.
	an error on its serial port.	2.	If problem persists, replace main
			PCB module.

Error Code Categories

As a reference, the following table lists the general categories for other error codes. The error code categories are shown only in hexadecimal format.

Hexadecimal Code	Explanation
500xxx	internal user interface error
501xxx	remove serial port error
502xxx	date and time error
503xxx	NBP error
504xxx	front end error
505xxx	alarm error
506xxx	audio error
507xxx	recorder error
508xxx	trend error
509xxx	flash memory data error
50axxx	SpO2 error
50bxxx	ECG error
50cxxx	power-down task error
50dxxx	on-board diagnostic error
50exxx	power monitor error
50fxxx	temperature measurement error
510xxx	internal user interface error
511xxx	error handling error
513xxx	serial driver error

6-12Troubleshooting