Performance Procedures

Step

Action

 

 

5

With the monitor Off, press the On/Standby button. (When the monitor is turned

 

on, the battery icon may initially indicate a higher charge then it actually holds -

 

wait 5 minutes or until after an NBP measurement for an accurate battery

 

reading.)

 

 

6

Verify that the monitor is responding to the SpO2 simulator signal and that the

 

audible alarm is sounding. Use the navigation wheel to select the SpO2 Menu

 

and permanently silence the SpO2 audible alarm. Select the Heart Rate Menu

 

and silence the Heart Rate alarm.

7

Use the navigation wheel to select the NBP Menu and set the Automatic

 

Interval Mode option to 15 minutes. Select Return to exit the menu.

 

 

8

Press the NBP button on the monitor’s front panel to start the first NBP

 

measurement. Subsequent NBP measurements are taken automatically every 15

 

minutes.

 

 

9

Verify that the battery icon displays at the bottom of the display. Note the time.

 

(At least one segment of the battery icon should be filled.)

 

 

10

Keep the monitor On until the low battery warning alarm occurs. Note the time.

 

Verify that alarm sounds 15-30 minutes before the battery fully discharges.

 

 

11

Keep the monitor On until it automatically powers down due to low battery

 

condition. Verify that the audible alarm sounds when the monitor automatically

 

shuts down. Note the time.

 

Press any front panel button, on the monitor, to terminate this audible

 

alarm.

 

 

12

If the monitor passes this test, immediately recharge the battery. If it fails the

 

test, replace the battery. (See “Removing the Battery” on page 7-4for more

 

information).

 

 

Temperature

The accuracy of the monitor’s temperature measurements is ±0.1°C (±0.2°F). In the procedure

Test

below, add the tolerance of the simulator to the acceptable range of readings.

 

Tools Needed:

•Dynatech Nevada MedSim 300 or equivalent simulator

•Temperature cable (supplied with the temperature simulator)

Note

The instructions below apply to the Dynatech Nevada MedSim 300.

Step Action

1Verify the monitor is turned Off. Connect the temperature cable to the appropriate connector on the temperature simulator.

2Connect the temperature cable to the Temperature patient monitoring input connector.

Testing the Monitor 4-23

Page 72 Page 74
Page 73
Image 73
Philips 862474, 862478 manual Alarm
Page 72 Page 74

862474, 862478 specifications

The Philips 862478 and 862474 are standout products in the realm of advanced lighting solutions, showcasing the company's commitment to innovation and high-quality design. These models highlight the integration of modern technology and user-centric features, making them ideal choices for both residential and commercial settings.

One of the main features of the Philips 862478 is its versatility in application. This model is particularly designed to offer both ambient and task lighting, which can be invaluable in creating the right atmosphere in any environment. Its sleek design is complemented by energy efficiency, aligning with contemporary demands for sustainable solutions that do not compromise on performance.

The Philips 862474, on the other hand, emphasizes smart technology integration. It boasts compatibility with various smart home systems, allowing users to control their lighting through voice commands or mobile applications. This feature enhances convenience and accessibility, catering to the busy lifestyles of modern users. Both models utilize LED technology, ensuring long-lasting illumination while significantly reducing energy consumption compared to traditional lighting alternatives.

In terms of performance, the brightness levels of the 862478 and 862474 are adjustable, providing users with the flexibility to tailor lighting intensity to their needs. This adaptability is essential in spaces that require varied lighting conditions throughout the day. Additionally, the color temperature options available with these models range from warm to cool light, promoting comfort and productivity in different settings.

Safety features are also paramount in these Philips models. They comply with international safety standards, ensuring that users can trust their durability and functionality. The materials used in their manufacture are of high quality, further enhancing their robustness for long-term usage.

Overall, the Philips 862478 and 862474 exemplify the brand's focus on smart, energy-efficient lighting solutions that seamlessly integrate into modern lifestyles. Their blend of functionality, aesthetic appeal, and advanced technology makes them a favorable choice for consumers looking to enhance their living or working spaces. Whether it’s for creating a cozy home environment or an efficient work area, these Philips models stand out as reliable and innovative lighting solutions.
Top Page Image Contents