Philips V24CT, V26CT manual Environ, Ment

	Installation Information
Environ-	To ensure a completely safe electrical installation, follow the instructions
ment	described later in this section. The environment where the system will be
	used should be reasonably free from vibration, dust, corrosive or
	explosive gases, extremes of temperature, humidity, and so on.
	For a cabinet mounted installation, allow sufficient room at the front for
	operation and sufficient room at the rear for servicing with the cabinet
	access door open.
	Approximately 15 minutes after switch-on, the patient monitor and the
	Anesthetic Gas Module operate within specifications at ambient
	temperatures shown in the tables below. These specifications do not
	apply to the plug-in modules; they are specified for different ambient
	temperatures.
	Ambient temperatures that exceed these limits could affect the accuracy
	of these instruments and cause damage to the components and circuits.
	Allow at least 2 inches (5cm) clearance around the instruments for proper
	air circulation.
	Refer to the tables below for a summary of the environmental
	specifications of the different system combinations:

Monitor Installation and Patient Safety

Monitor Installation and Patient Safety 11-9