Philips V24CT, V26CT manual Heart Rate HR / Pulse, Pressure, SpO2, Adult bpm Pedi/Neo bpm

Changing the Patient Category

Heart Rate

(HR) / Pulse

	Adult (bpm)	Pedi/Neo (bpm)
Cardiotach Range	15 to 300	15 to 350
HR Alarm Limit Range	15 to 250	15 to 300
Pleth/Pressure Pulse Alarm Limit	30 to 250	30 to 300
Range
The expected range can be estimated by performing a manual pulse
count.

RESP

	Adult/Pedi (rpm)	Neo (rpm)
Respirotach Range	0 to 120	0 to 180
High Alarm Limit Range	10 to 100	30 to 150
Low Alarm Limit Range	0 to 95	0 to 145

	In general, use the Adult or Pediatric category if rates below 50 rpm are
	expected; use Neonatal if expected rate is above 100.
Pressure	The algorithm responsible for respiration artifact suppression is used in
	all three patient categories for the 10 and 30 scales. In the Pediatric and
	Adult categories, the algorithm is also used for the 60 scale.
SpO2	Default for averaging time is 10 seconds for Adult, Pedi and Neo.
	Note—Default can be changed in Configuration Mode.

Setting up your Monitor

Setting up your Monitor 3-51