Philips V24CT Getting into the Operating Levels, Below to get into the Selection and Task Windows

Getting into the Operating Levels

below to get into the Selection and Task Windows.	V24andCMSTheand MonitorsPatientV26
Operating Levels
Before you can start to make adjustments or changes to the parameters or
perform a procedure, you need to know how to get into the operating
levels and how to navigate through the selections. Follow the procedures

Selection Window

1.Press the blue-labeled hardkey for the function you require.

2.When you get into a Selection Window, the bottom line is always active. Select the line with the parameter or function you require, by pressing the same hard key again that got you into the selection window, or use the arrow keys if they are illuminated.

3.Press either the softkey corresponding to the parameter or function you require or Confirm . This gets you into the Task Window.

For example, to get into the Noninvasive Blood Pressure (NBP) Task Window:

1.Press the hardkey Module Setup

2.If it is not already active, select the line containing NBP by pressing

Module Setup again.

3.Press the softkey NBP to get into the Noninvasive Blood Pressure Task Window.

Task Window

There are two ways to get into a parameter Task Window, either:

via the Selection Window,

or

by pressing the Setup key on the parameter module which gets you directly into the Task Window.

Getting into other Task Windows for functions like Other Patients or Monitor Setup is only possible via the Selection Window. In the Task Window there are separate keys. The selections that are currently active for the parameter or function you have chosen are indicated by yellow labeling. In addition the selected keys appear to be “pushed in” on the screen.

The CMS and V24 and V26 Patient Monitors 1-25