Philips V24CT, V26CT manual What you Can Configure

What you Can Configure

What you Can Configure

Changes and adjustments you make to the settings in Monitor Setup screens remain active while the system is switched on. With the exception of changes to the date and time, all settings revert back to their default settings (factory defaults or user defaults) if the system is switched off for longer than 60 seconds. The settings for the date and time are stored by the system when it is switched off.

Note—If necessary, these default settings can also be changed. This is done in a special configuration mode, either by your biomedical engineering department or the Philips service engineer. See the ““Changing Default Settings and Patient Category” on page 3-44 for more details.

Monitor

Setting up your

Setting up your Monitor 3-5