Philips V24CT, V26CT manual Procedure Analog Output CMS only, Press hardkey, Then

Procedure

Analog

Output (CMS only)

			The Test Signals Function
1.	Press hardkey
		Monitor Setup
2.	Press softkey		in the Instrument Configuration
		Test Signals
	Selection Window.

The monitor returns to Main Screen. Test waves for each parameter being monitored are generated for 30 seconds to test the processing abilities of the monitor. The message “Test Signals active - no monitoring” appears on the screen.

After 30 seconds, the monitor automatically switches back to Monitoring Mode.

If you want to go back to Monitoring Mode before 30 seconds have

elapsed, press Monitor Setup , then Stop Signals .

The Analog Output function provides eight channels of Analog Output for connection to recorders and other data collection instruments. For more information on Analog Output, refer to Appendix B.

Setting up your Monitor

Setting up your Monitor 3-59